<tt id="a6kk0"><rt id="a6kk0"></rt></tt>
<acronym id="a6kk0"></acronym>
<rt id="a6kk0"><small id="a6kk0"></small></rt>
<acronym id="a6kk0"><center id="a6kk0"></center></acronym>
<rt id="a6kk0"><small id="a6kk0"></small></rt>
<acronym id="a6kk0"><center id="a6kk0"></center></acronym><tr id="a6kk0"><optgroup id="a6kk0"></optgroup></tr><sup id="a6kk0"></sup>
<sup id="a6kk0"></sup>

最新新聞

首頁 > 最新新聞
路沿石模具采用鑲拼結構的好處
發布人:管理員   發布時間:2020-7-10

路沿石模具在凹模的設計中,采用鑲拼結構的好處有在路沿石模具的生產設計中,簡化凹模型腔加工,將復雜的凹模內形體的加工變成鑲件的外形加工,降低了凹模整體的加工難度。

In the design of die for curbstone, the advantage of using inlay structure is that in the production design of curb stone mold, the processing of cavity of concave mold is simplified, and the processing of complex internal body of concave mold is turned into the shape processing of insert, which reduces the processing difficulty of the whole die.

路沿石模具鑲件可用高碳鋼或高碳合金鋼淬火后變形小?捎脤S媚ゴ矎碗s形狀和曲面。凹模中使用鑲件的局部型腔有較高精度。經久的耐磨性并可置換?晒澕s****塑料模具鋼,尤其對于路沿石模具更是如此;有利于排氣系統和冷卻系統的通道設計和加工。

High carbon steel or high carbon alloy steel can be used for the insert of curbstone mould, and the deformation is small after quenching. Special grinding machines are available for complex shapes and curved surfaces. The local cavity with insert in the female die has higher precision. Durable wear resistance and replaceable. It can save high-quality plastic mould steel, especially for curbstone mould, and is conducive to the design and processing of exhaust system and cooling system.

            

路沿石模具結構設計中還應注意以下要點:凹模的強度和剛度因此有所削弱,故?虬鍛凶夠的強度和剛度;鑲件之間、鑲件與?蛑g應盡量采用凹凸模相互扣鎖,以減小整體凹模在高壓下的變形和鑲件的位移。鑲件必須****定位,并有可靠緊固;鑲件解封必須配合緊密,轉角和曲面去不能設置拼縫,拼縫線方向應與脫模方向一致。

The following points should also be paid attention to in the structural design of curb stone mould: the strength and rigidity of female die are weakened, so the die frame plate should have enough strength and rigidity; the concave convex die should be used to lock each other between the inserts and between the inserts and the mold frame, so as to reduce the deformation of the whole die and the displacement of the insert under high pressure. The insert must be accurately positioned and reliably fastened; the unsealing of the insert must be closely matched; the edge seam cannot be set at the corner and curved surface, and the direction of the seam line should be consistent with the demoulding direction

路沿石模具制作模具此階段主要是客戶與供應商之間進行的關于產品設計和模具開發等方面的技術探討,主要的目的是為了讓供應商清楚地領會到產品設計者的設計意圖及精度要求,同時也讓產品設計者更好地明白模具生產的能力,產品的工藝性能,從而做出更合理的設計。

The main purpose of this stage is to let the supplier clearly understand the design intention and precision requirements of the product designer, and also let the product designer better understand the mold production capacity and product process performance, so as to make the product more suitable Rational design.

成人1卡2卡3卡,日本一卡二卡三卡四卡无卡在线观看免费,一卡二卡三卡在线,一卡二卡三卡四卡五卡中文字幕,一卡二卡三卡四卡视频欧美