路沿石鋼模具預制較大構件或較重構件時容易變形,建議使用木板夾好或使用卡子或使用做好的鐵框子。
It is easy to deform when large or heavy components are prefabricated by stone steel mold along the road. It is recommended to use wood plate or clip or iron frame.

夏天溫度較高時預制構件必須蒙上麻袋片或稻草袋或遮陽網,以防太陽曬裂預制件,并按時灑水養護需要做帶孔的預制塊時所用的管子必須及時抽出,放止時間長了抽不出來。
When the temperature is high in summer, the prefabricated components must be covered with sacks or straw bags or sunshade nets to prevent the prefabricated parts from cracking in the sun. The pipes used for making prefabricated blocks with holes must be drawn out in time and cannot be pulled out after a long time.

路沿石鋼模具脫模后暫時不用的模具必須在清理后擺放整齊防止變形。脫模時使用的敲擊工具必須是木錘或皮錘。脫模時要用脫模器或下面墊麻袋片或墊稻草袋或廢輪胎,以防損壞預制件和模具。
After demoulding, the unused molds must be placed in order to prevent deformation. The percussion tool used in demoulding must be wooden hammer or leather hammer. When demoulding, the demoulding device or burlap bag or straw bag or waste tire should be padded under it to prevent damage to the preform and mold.

震動平臺上要經常清理,保持平整,收工時清理干凈。預制較大構件時,若模具直接放在地上用振動棒時,振動棒頭上必須套上皮套,否則可能減少模具使用壽命。
The vibration platform should be cleaned regularly, kept flat, and cleaned up after work. If the mould is placed on the ground directly, the vibration life of the mould must be reduced if it is placed on the ground.